vmv@bellowvalves.com  |  +86-577-67978269  

Cast Bellow Seal Globe Valve

Forged Bellow Seal Globe Valve

Comparison Between Bellow Seal & Traditional Valves

  Bellow Seal Valves Piston Valves Conventional Valves
Primary stem seal Metallic Bellow Piston Ring Gland Packing
Secondary stem seal Gland packing None None
Stem Leakage Not Possible since Metallic Bellows are designed to last several thousands cycles Occurs as soon as the ring wear out. Very common. Due to friction between stem occurs within a few cycle no matter which make valve or quality of gland packing
Packing Replacement Not applicable Rings need to be changed frequently Packing needs to be replaced very often
Replacement Cost Not applicable Very High High
Media Loss Zero Loss. As the isolation is by metallic bellows, leakage (in ppm) is not possible. Large in case of leaks Considerable amount through gland leakages. Normally large amount when leakage remains unattended.
Equipment Downtime Nil Very High for replacing rings Very high for replacing gland packing
Maintanance Cost often Nil High as rings need to be changed atleaset once in six months Very high, Gland packing needs to be replaced / repacked. The cost along with equipment down tme, man hours spent act is very high.
Valve Life High-in years Low VeryLow - in -months. Due to leakage through gland, certain parts erode, making the valve irreparable after some months.
Safety Can be used safely for almost any media Can be used for limited medi like steam, hot water Highly unsafe when the media is hazardous / poisonous
Cost Comparatively higher initially but lowest total cost of ownership High compared to the benefits Initially low but very high after some years if cost pf packing, down time, man-hours spent, number of valves replaced act. are taken in to account.

Products Category

Longer Bellows Globe Valve-ADVANTAGES

  • Stem :2-part rising stem with outside roll-formed thread; stem coupling with bellows anti-torque device .

  • Bellow : Multiple wall, fully flushed stainless steel bellows, secured against torsion, designed for 10,000 cycles; fully welded

  • 360º free rotation disc that allows the cleaning of impurities that can carry the fluid to make the closure on the different surfaces of the seat, at the same time, it does not transmit the vibrations to the valve stem.

  • Conically shaped plug made of hardened chromium steel 1.4021/AISI 420, or hard-surfaced with stellite 6; body seat hard-surfaced with stainless steel 1.4370/ AISI 307 or stellite 21