- How to solve the leakage or leakage of the globe valve
-
Internal leakage is usually a damage to the valve seat or the sealing surface of the valve plug. This can grind the seat or the sealing surface of the valve plug, but there is still
An ad hoc condition may be that the valve stroke is not set if it is electric or pneumatic. What is the central leak,
If the valve body leaks, only the valve can be changed.
If the inner leakage is a problem, the sealing surface should be a problem. If the sealing surface is disposed of to see if the result leaks out, the valve is divergent, and the leaking position is different. If the leakage at the filling point is to be treated differently, close or change the packing, we cannot Parking is done with pressure plugging.
The external leakage is also beneficial to handle. Regarding the leakage of the middle flange, tighten the bolt of the middle flange again. If it is not enough, open it.
Look at the damage of the middle flange gasket. Regarding the leakage at the packing, it is necessary to press the packing gland. If the packing is too loose, it is necessary to Add filler, if it is directly leaking on the body, if it is low pressure, it can be welded. If it is high pressure, just abandon it.
Ping An first, about the problem of internal leakage, the situation is not good, first, may not be shut down, and then shut down Second, the valve seat seal is damaged, this must be re-grinded. Regarding the damage of the valve core, it is necessary to wash the damage. Damaged by media impact, but both must be re-welded to the sealing surface.
There are many leakage points in the forged steel stop valve. Most of the external leakage is leaking from the gland, and the gland is opened or added.
The packing should be tightened and the gland should not be leaked. The inner leak is that the sealing surface on the inside of the inner spool is broken, but the practice is The calendar informs us that some time leaks may be caused by a hard object stuck on the valve core, forming an internal leak, detailed disposal methods It is necessary to open the valve and close it, and then it will be able to wash away the hard object several times.
globe valve types
globe valve animation
globe valve uses
globe valve vs gate valve
globe valve diagram
globe valve manufacturers
globe valve parts
globe valve symbol
Professional in Bellows Seal Valve Manufacturer | Since 1994
